Normal mode Connect the soldering station working te adjust the set temperature of the soldering station ;
clockwise rotation is the temperature increase , each rotation increases 5 degrees , counterclockwise rotation the temperature decrease , and each rotation decreases 5 degree : the temperature of the soldering station can be adjusted in the range of 120-450 °C and the accuracy 25 °C Preset mode Normal Mode – > Preset Mode ) In the normal heating state of the soldering station ,
click the encoder to enter the preset mode . The preset mode can quickly set the heating core temperature to 300 °C , 350 °C , and 400 °C The rotary encoder can choose the preset temperature . When the preset temperature is selected , the number flashes , that is , the current working temperature of soldering station heating core is set . If you exit the preset mode click the encoder again to exit ( preset mode- > normal mode )
3. Sleep mode T210 constant temperature soldering station , under normal working conditions , put the handle into the dormant seat to enter the dormant state ( the temperature of the heating core drops to room temperature ) to avoid the heating core for a long time , protect the soldering iron tip , and prolong the service life of the soldering iron tip .
If the handle is placed on the soldering iron base , the host recognizes that it enters the sleep mode and the heating core starts to cool down ; the backlight then turns off: When the handle is picked up to work, the screen backlight will automatically turn on and the normal working mode of the soldering station will be restored. Note : Dormancy soldering station base must be connected to the dormancy socket interface on the back of the host to have the dormancy function ; otherwise , the dormant state cannot be entered
Reviews
There are no reviews yet.